Why Need DVI to Hdmi Cable Adapters

High definition (HD) televisions provide viewers with higher quality picture than standard definition televisions. Currently, HDTVs are equipped for connections to devices such as computers, gaming consoles, DVD players and cable or satellite television service. These devices may use Digital Visual Interface (DVI) or High-Definition Multimedia Interface (HDMI) ports and cables. Although these technologies both provide excellent picture quality, DVI does not provide audio input, thus a DVI to HDMI Cable adapter may be necessary.
Functions
According to TopBits, Digital Visual Interface "was designed for computer associated transfers," such as the transfers between a computer's video card (in the tower) and a monitor, as opposed to the audio and visual transfers required between a television set and other electronic devices.
In comparison, HDMI technology has always included both audio and visual capabilities. DVI and HDMI connections have both become standard; however, some consumers may only be able to connect a DVI cable to their computer and an HDMI cable to their television, or vice versa.
Identification
Consumers can recognize DVI connectors on cables by their bulky appearance with multiple, small pins within a small metal shield that is shaped like the capital letter "D." On either side of this shield are pins or nuts (sometimes known as thumb screws) that users screw into the device to secure the cable. By comparison, HDMI connectors are smaller and the user must simply push the plug into the port.
The male DVI plug on the DVI cable fits into the female port on the DVI to HDMI cable adapter. A short able extends from this connection and the adapter ends with a typical, male, HDMI plug that the consumer can plug into her HDTV.
Benefits
According to TopBits, both DVI and HDMI technology provide an equal quality picture. The addition of the DVI to HDMI cable adapter allows users to connect devices that would not otherwise be compatible with a single cable without sacrificing picture quality.
Considerations
Ram Electronics warns that users should exercise caution when adapting DVI connectors to HDMI connectors. The website advises using cables no more than 50 feet in length when adapting transfer data from a DVI device to an HDMI device.
Additionally, consumers may consider purchasing a DVI to HDMI cable, without installing an adapter at all. These cables have a DVI plug on one end, to connect to the DVI device, and an HDMI connector on the other end to attach to the HDMI device. Thomas Steves advises consumers that a "single cable of proper length connected directly to the equipment is the optimum configuration" for high definition systems.
Warning
There are multiple types of DVI connectors that are not interchangeable with one another. TopBits explains that analog devices only use DVI-A connectors while digital devices only use DVI-D connectors. DVI-I connectors are compatible with both digital and analog devices, however. Consumers will want to ensure that the DVI to Mini HDMI Adapter they purchase will work with their digital or analog DVI device.

HDMI Cable How to Adding an additional monitor

Adding an additional monitor to a computer used to be a real chore. If you were already using all the video ports on your desktop, you either had to swap out your video card for a new one, or add a second video card. If you were already using the video port on your laptop, you had some options with PCMCIA cards, but those were pretty expensive and not always very effective.
Fortunately, now there’s an easy, affordable option to add a monitor to either a desktop or a laptop computer. Using Sewell Direct’s MiniDeck USB to DVI, VGA, and Usb HDMI Adapter you can quickly add a monitor to any Windows or Mac computer that has USB 2.0 ports.
This will save you from having to tear open your desktop computer or hope you can find a card that will work with your laptop. The best part about it is how incredibly easy it is to install and use.
Why would you want to add another monitor?
Some people ask what the point to adding another monitor is. There are several benefits to adding an extra monitor, which include increased flexibility and productivity when using your computer. Computers can handle displaying information from many different sources at the same time, but on a single monitor it’s difficult to view more than just the single window you have as the top window. With multiple monitors you can display different information across each screen.
This can be very helpful since you can view a source of information on one screen while typing a document on another. You can set up multiple monitors to track your stock charts. You could watch a movie on one monitor while browsing the web on the other.
Adding additional monitors allows you to truly take advantage of the multi-tasking capabilities of your computer.
Installation Steps
Here are the steps required to install an additional monitor using the Sewell Direct.
Install driver
Plug adapter into monitor
You need to simply take the monitor cable that would normally plug into the computer and plug it into the DVI end of the adapter. If your monitor has a VGA connection, simply use the included DVI to VGA plug adapter to make it possible to connect it.
Plug adapter into computer
To do this, simply take the included mini usb hdmi cable and attach the mini USB end to the adapter, and then connect the regular USB end to the computer.
Wait for screen to initialize
The computer should automatically recognize the adapter and the monitor, and after properly configuring both things the display will turn on. At first it will look just like it is just a picture of your desktop background, but you will then be able to drag windows across from one screen to another.
Using the Sewell Direct MiniDeck is a snap. The benefits are definitely worth the 60 seconds of your life that it takes to set up too. Check out the product description for more details on the product and what it’s capable of.

Cheap HDMI Cables Really Difference in Picture Quality?

For high-definition home theater device, 1.4v hdmi cables have become the standard mode of audio and video connection. The standard of HDMI is defined in two categories: in first category best HDMI cables are designed to support HDTV resolutions and frame rates, and in second cables are required for higher resolutions or higher frame rates. HDMI cable has immense capability to make your home theater system much simpler, as it handles both images and sound.
If you drive around your typical electronics store to shop for best HDMI cable , you’re likely to observe prices around $40 to $50 with promises of better signal performance and faster speeds. But, does it really interest you to spend that much amount on a single HDMI cable? I think, absolutely not—these cables are not worth of that amount of money.
It’s not a good idea to spend more than $10 to $15 for a standard six-foot HDMI cable. No matter whatever quality salesmen and manufacturers demonstrate you, there’s no significant disparity between the $10 cable and the $50 cable. Unless you see something obvious, such as dropouts or a flashing screen, the digital information transmitted by both cables is exactly the same–no cable can make the picture any better or any worse.
Accounting the online shopping experience, I came across various online retailers where discounted HDMI Cables wholesale are widely available. Definitely, it is much better choice instead of the wasting money in your local electronics store. With working cables and solid connections, you will see no weak signal and ‘sparklies’–only uninterrupted, steady, dependable and high-quality audio and video signal.

What Is An HDMI Cable and Attention problems

When it comes to digital cables, HDMI Cables wholesale are the most advanced cables you can get today. HDMI cables transmit both uncompressed audio and digital video signals from one device (such as a Blu-ray player) to your flat-panel TV. This ability to carry both audio and digital video signals is great because it eliminates the need for separate audio and video cables, thus reducing clutter. What’s more, you get the highest quality signal possible because HDMI cables support all high definition TV (HDTV) resolutions (including 720p, 1080i and 1080p) as well as EDTV (480p) and standard definition signals. As for audio, while even more improvements are in the works, HDMI cables currently support up to 8 channels of 24-bit audio. This is the best you can get today.
HDMI 1.4 Specification
The HDMI 1.4 specification, which was announced in June of 2009, introduced some major enhancements to HDMI cables. These improvements were further advanced in March of 2010 with the release of the 1.4a specification. The most important capabilities included in the HDMI 1.4 specification were:
Support for Ethernet – This allows you to use an IP-enabled device without needing a separate Ethernet cable.
Audio Return Channel – This eliminates the need for a separate audio cable because you are now able to send audio to a surround sound audio system through the HDMI cable.
Support for 3D – the new version now support both input and output protocols for major 3D video formats. This allows you to get the full benefit of a 3D TV or gaming system.
Video Resolution Support Beyond 1080p – you now have full support for next-generation displays with super-high resolutions that are even higher than 1080p HDMI Cables.
There are several other enhancements introduced in the 1.4a specification. If you would like to learn more, read our comprehensive review of the 1.4a specification in our blog post entitled, What’s New With The Version 1.4a HDMI Specification.
The CL2 and CL3 Designations
The CL2 and CL3 designation define how HDMI cables react in a fire. Both CL2 and CL3 rated cables are made with flame retardant, low-smoke materials, making them safer if they are exposed to heat or fire. Because CL2 and CL3 cables are flame retardant, they can be used for in-wall installations. That means that these types of cables are safe to run through your walls. Never run any type of cable through your walls if they are not rated for in-wall use.

When Shopping for an HDMI Cable What You Need Look

When you’re ready to purchase an Mini hdmi cable, look for the following features:
Gold-Plated Connectors – Gold-plated connectors achieve superior signal transfer.
Shielded Cables – Cables that are fully shielded protect against interferences such as environmental EMI and RFI.
Support for 1080p - Support for high resolutions such as 1080p allows you to get full HD video streams giving you the clearest picture possible today. This is what you want when you’re looking to maximize your investment in the latest LED TV, LCD TV, plasma TV, Blu-ray, DVD player, DVR player, satellite, cable box, AV receiver, projector & HD game consoles on the market.
Support for Beyond 1080p – Support for 4K x 2K high definition video and digital AV sources means you’ll be ready to upgrade when the time comes.
Support for 3D - Many newer TVs or gaming consoles are now 3D-capable so if you’ve got a 3D-enabled device, you’ll be able to transmit 3D signals to your TV.
Support for Ethernet - The latest home entertainment devices are IP-enabled, meaning that they can interact with the Internet or be connected to a local network. Using an HDMI cable that supports Ethernet means that you no longer need a separate Ethernet cable.
Conclusion
Improvements in the HDMI standard allow for a much better HD experience. Most notably, major enhancements introduced in versions 1.4 and 1.4a gave HDMI cables the ability to support some of the latest technologies available today, such as support for Ethernet and 3D. If your goal is to maximize your audio and digital video signals, then HDMI cables are the way to go.
If you would like to shop for a high-quality vga to hdmi cable, we offer a very wide selection of sizes ranging from 3 feet all the way up to 60 feet on our HDMI Cable page. More information and products please check our website www.wholesalehdmicable.com

What should you care when use MHL Cable

MHL stands for Mobile High-Definition Link technology, which allows you to display your smartphone’s content to a larger screen, all while charging your mobile device. Transform your smartphone into a home theater system, stream your favorite TV channels or movies in HD, and experience your favorite music with immersive surround sound. If you’re a gamer, you’ll love playing games on the big screen with MHL Cable, and paired with a Bluetooth game controller you can have the ultimate, untethered gaming experience.
Modern mobile phones and the latest generation of tablets are so thin it's not possible to integrate an HDMI port within them. To compensate, many manufacturers have included MHL ports on their devices. These Mobile High-Definition Link ports look and act like micro USB ports, but can also be used with an appropriate adaptor to stream HD content and digital audio to an HDMI-equipped TV, monitor or projector. The adaptor supports full 1080p playback, so no matter how powerful your device you can be sure this cable is up to the job.
MHL technology is in hundreds of millions of devices and it’s in many of the leading Android smartphones and tablets, with a steady stream of products being released. MHL shares the same connector on your phone that you use to charge your phone. If you have an MHL TV, MHL shares the same connector as an HDMI port. Simply connect your MHL-enabled phone or tablet to your TV, monitor or projector to mirror everything on your phone to the larger screen display. Is your TV not MHL-enabled? An MHL adapter makes any HDMI display an MHL display.
Utilising the advanced Mobile High-Definition Link (MHL) via the Micro USB port on your smartphone or tablet, you can now enjoy all your content on any HDMI-compatible display in resolutions up to 1080p. Simply plug your existing Micro-USB charging cable into the MHL Adapter, connect a HDMI cable to your display and sit back and enjoy.
Video playback can be very battery-intensive, especially with HD video. To combat this, the cable has a standard micro USB port integrated into the adaptor, so you can plug in a charger or Usb to HDMI Converter cable and enjoy your high-definition content without worry about if it's going to cut out when the battery dies. Please note, the adaptor must be plugged into the mains, you cannot use a computer's USB port for power.

The Best Sanguan 5x1 HDMI switcher Online

HDMI connectivity is quickly becoming a must-have connection type for all types of gadgets. But while the list of gadgets with an HDMI output is growing, the number of HDMI inputs on HDTVs and receivers is limited--you'll need to spend a lot of money before you see more than three inputs on either. That's where HDMI Switcher come into play, allowing you to add more HDMI-enabled gadgets to your home theater setup without paying the big premium on your HDTV or AV receiver. The Monoprice 5x1 switcher features an extremely affordable price tag of $50, and also offers the most ports of any of the HDMI switchers we've reviewed.
Sanguan Hdmi switcher is solidly built. The exterior casing is all metal, which makes it seem like it could survive a fall from your AV rack--which occasionally happens with all those HDMI cables hanging off the back. The front panel features five LED lights to indicate which source is connected, and an additional LED to indicate that the switcher is on. There's only one button on the front panel, which is an "input select" button for changing inputs when the remote goes missing. We were glad to see a full-size remote is included, unlike the "credit-card-style" remotes we're used to seeing with most other switchers. There are five buttons available for directly selecting an HDMI input, as well as Backward and Forward buttons to sequentially "flip" through your inputs.
The Sanguan switcher offers the most connectivity options of any of the switchers we tested, with five HDMI inputs and one output--enabling you to switch between five connected devices. As mentioned above, there are discrete remote codes for each input, which make it easier to program with a universal remote, and universal remotes make it much easier to integrate an HDMI switcher into your home theater setup. For example, with an activity-based universal remote like a Logitech Harmony, you can simply select "Watch TV" and it will change the respective inputs on the switcher, the TV, and the AV receiver without you needing to remember which input is which.
Other new products in www.wholesalehdmicable.es, please click: Displayport Cable

Which Kind of DVI Cable do I Need Find?

In general, there are only two signal types which run through DVI connectors. The two types are digital and analog, and they are incompatible with one another. If you use a DVI cable to connect a device that sends out only digital signals to a device that accepts only analog signals, or vice versa, you'll get no signal; so the first question you have to answer is whether your devices can talk to each other at all.
The Digital Signal: "DVI-D"
The digital signal type that runs through a DVI cable is sometimes referred to as DVI to DVI Cable. This format is completely incompatible with any analog signal format, and therefore cannot be connected to anything that doesn't also handle DVI-D or HDMI. If the socket on your device is a DVI-D socket (that is, if it lacks the four pin sockets for an analog signal which surround the broad flat "ground" pin; see photo at right) then this port will only handle DVI-D signals. It cannot be connected to any analog source, such as component video, composite video, VGA, or the like. It can, however, be connected to an HDMI device by using a DVI/HDMI cable.
But some devices which support DVI-D may not have a DVI-D socket. Instead, they may have a DVI-I socket, which does have four pin sockets around the flat ground pin. When a device has a DVI-I socket, it may be any of three types, and which of these it is can ordinarily be determined by consulting your user's manual:
(1) DVI-D only; this device has no signal available on the analog pins, but uses a DVI-I socket only to allow a DVI-I cable to be used;
(2) DVI-A only; this device has no DVI-D digital signal available, and is simply using a DVI socket as a port for accepting a regular analog signal format (usually RGBHV, which would include VGA). The device may be connected to any RGBHV device, using a DVI-I cable, a DVI/VGA cable, or a DVI breakout to five separate lines for R, G, B, H and V.
(3) True DVI-I; this device has both analog and digital capability through this port. It may autosense, using a digital signal if present or an analog signal if no digital signal is found, or the digital/analog mode may have to be selected manually by a switch or menu selection.
Once you know whether your devices are compatible, selecting a cable to connect them is relatively simple. While there are DVI-I cables available, which will handle both analog and digital signals in one cable, there is no good reason to use one; in any application, only the digital or the analog part of a DVI-I cable will get used, and it's crowded enough inside a DVI cable without adding a bunch of redundant cables to the bundle.
If your signal will be digital, you should use a digital-only cable. If both devices use DVI connections, then you will want a regular DVI-D cable. If one end is DVI and the other HDMI, you'll want a DVI-D to HDMI Cable.
If your run will be longer, we suggest using a full-sized set of RGBHV cables to make the connection, terminated with male BNCs at one end, together with a breakout adapter with a male DVI plug and five female BNCs at the other. Many people don't like to use adapters, and we're often asked whether this will contribute to signal loss. The answer is a definite no; the whole point of going to a full-sized cable, in fact, is to minimize signal loss. The loss associated with running any significant distance in miniature cable of the type that will fit a DVI plug is much greater than the loss associated with making a BNC/BNC connection along the line, and not only is the total attenuation loss lower using full-sized cables, but the loss of signal quality from impedance mismatch is far lower; it's simply much easier to maintain tight impedance tolerance in a full-sized cable than in a miniature cable, because the dimensions are easier to control.

Considerations When Using an MHL Adapter

No matter how big a screen a tablet or android smartphone has, there are always times when they are just too small. That same 10.1 inch 1080P HD tablet screen that looks great for one person really falls flat for a whole room. This is where Mobile High-Definition Link, or MHL technology, comes into its own. An MHL to HDMI adapter is the latest approach to mirroring high-definition content onto a big screen HD TV from a portable device. Whether for gaming or playing HD video, an MHL adapter takes mirroring to the next level. Using an MHL adapter just requires being able to plug in the cables into the right places.
Benefits of MHL to HDMI Mirroring
The big benefit of using MHL rather than a straight HDMI to HDMI connection is that unlike HDMI, MHL is a bi-directional connection. Data flows one way, and power flows the other. MHL uses the portable device's micro-USB connector rather than its HDMI out so that it can charge the device while playing video. This makes it a much more viable solution for those looking for something they can just use without worrying about battery levels.
Using an MHL Adapter for HDMI Mirroring
Using an MHL adapter is staggeringly simple. The user just plugs one end of the MHL cable into an MHL TV and the other into the portable device's USB port and waits for the connection to initialize. Unfortunately, there are a few compatibility and technology issues that users need to take into consideration before hooking everything up.
Choosing the Right Kind of MHL Adapter
There are two main kinds of MHL adapter: powered and unpowered. The unpowered connector, which is often described as passive, or sometimes called just an MHL connector, looks like a simple cable with a USB connector on one end and HDMI on the other. It is the simplest choice but requires a TV with MHL support.
The other option is to use a powered adapter. A powered MHL adapter provides a pass-through for an Locking HDMI Cable from the portable device to the TV while feeding power back to the portable device. This has the advantage of working with any HDMI-equipped TV although it does need to be plugged into the wall to work. For most users, a powered MHL adapter is the better choice.

Difference Between VGA Cables and HDMI Cables

Connecting a new computer monitor or high-definition display presents a potentially confusing array of options. Representing analog and digital connectivity, VGA and Best HDMI Cable connections allow differing levels of functionality and compatibility. The cable you choose for your application depends on the jacks on the source device and monitor, a need for as few cables as possible or whether certain hardware resolutions are enabled on one cable type or the other.
Image Quality Considerations
VGA, also known as D-Sub, and HDMI are largely capable of the same level of video resolution. If your television, source or monitor offers 1920-by-1080 or greater resolution, you may find the all-digital HDMI connection looks sharper and crisper. High Definition Content Protocol restrictions may allow HDMI to extend into advanced resolutions not allowed over analog VGA. Since HDCP protection is enabled over digital formats like HDMI and not analog cabling, hardware companies compensate by reducing resolution capabilities to less than the cable itself can handle. Check whether your hardware is HDCP-compliant prior to selecting a VGA or HDMI interconnect; this can be found in your user manual or product literature for this information. If so, you may be forced to use HDMI to unlock the hardware's full video performance potential.
Audio and Video
One of HDMI's key features is the ability to pass audio and video over one cable. VGA and other cabling types do not offer this, requiring a separate analog or digital audio cable for sound. Additionally, HDMI has the bandwidth needed to carry uncompressed, lossless audio formats such as DTS Master Audio and Dolby TrueHD that even optical or coaxial digital cables do not. Although improvements in audio might not be that important when connecting directly to a TV or monitor, it is important when feeding through a surround sound system. Even if the audio requirements are basic, reducing cabling quantity in any installation is typically appreciated.
Physical Characteristics
VGA cables are larger than HDMI, using rotating locking nuts to secure the cable to connected devices. HDMI uses a smaller connecting shell, but may come loose if the cable is thick and oriented vertically from the back of a television or computer monitor. VGA's 15-pin configuration spaces the pins on the connector in a wider pattern, resulting in a connector that requires marginally more room on the back of a device. Although HDMI comparatively uses 19 wires for picture, sound and data, the overall size is more svelte and friendly in a crowded jack pack.
Other Considerations
Any cable carrying a video signal is subject to the same laws of physics observed by any other electrical wire. HDMI over 50 feet is subject to signal degradation, manifesting itself by your display showing digital "snow" or intermittent images. Repeaters installed in-line on runs 50 to 100 feet or more re-generate the signal, normally solving these issues. Displayport to VGA cables carrying higher resolutions over similar distances may have a reduction in color quality, increased noise in the image or ghosting. In either case, it's important to use the shortest distance possible given your installation requirements. Additionally, should your source device have a different output connector than the monitor, inexpensive adapters are available to convert the pinouts for increased compatibility.

Why we must need MHL Cable

You might wonder why MHL is really needed? We already have too many cable standards and the TV manufacturers’ inability to kill old standards such as SCART, composite, component, s-video and D-SUB (VGA) does not bode well for MHL Hdmi. Do we now need even more cable standards? And when MHL often requires an adaptor why not just use HDMI?
The MHL group hopes to make MHL popular despite its challenges. And MHL do have some advantages such as the small size that makes it a perfect fit for smartphones and tablets. MHL can also be combined with other connector designs, making it flexible and easy to incorporate into one unified connector; for example USB. This is not possible with HDMI.
Yet, MHL has already been the focal point in a controversy regarding Samsung's new Galaxy SIII smartphone. Its predecessor, Galaxy SII, was the first to implement MHL but with Galaxy SIII Samsung changed the connector type used for MHL and made every MHL cable and MHL accessory useless with one magic stroke, leaving users frustrated. The MHL standard’s open design guide lines are both a blessing and a curse as it does not dictate a concrete connector type. Your MHL accessories and cables are therefore not necessarily compliant with all manufacturers’ MHL implementations.
But the biggest question is if MHL has already been obviated by better wireless standards? Many consumers transmit video and audio wirelessly over their home network via DLNA or Apple AirPlay - in most cases with no effect on picture quality. So do we really need a new cable standard? Will MHL succeed?
Tell us about your experiences with MHL. Have you tried it on your smartphone or do you think that wireless solutions are superior?
Other new products in www.wholesalehdmicable.es, please click: HDMI Scart Adapter

The Best Choose Wireless HDMI Extender

Slowly but surely, it’s becoming clear that wires are so last decade. The HDMI cable is one of the last bastions of its reign, but a new product provides a wireless (though pricey) alternative.
New from is the Wireless Extender for HDMI 60 GHz, which lets you wirelessly extend HDMI 1.3 audio/video (as opposed to the upcoming Cheap HDMI 1.4 standard) to a remote location within 10 meters (30 feet).
What makes these units better than previously released HDMI wireless extenders is the uncompressed data transmission, allowing for a higher quality video.
The Sender and the Receiver boxes need a line-of-sight for the units to have maximum performance, so as shown by the product’s wired diagram (on the Gefen site), they are probably best used with ceiling projectors or wall-mounted televisions in order to keep things like furniture out of the way of the signal.
The Wireless HDMI Extender system works by using a matching pair of Sender and Receiver units. By plugging an HDMI source into the Sender unit and a HDMI display unit to the Receiver, the HDMI source can be extended across a room without the need for unsightly cables.
Gefen claims that the units have low latency while operating at 3Ghz bandwidth, two features that gamers should appreciate. The units are compliant with HDCP, support HD resolutions up to 1080p and can be used with a computer with a DVI connection.
In regards to sound specifications, the units can transmit 60hz full HD audio and supports up to 8-channel 24-bit 192kHz LPCM audio. The units themselves are smaller than their pictures suggest, and each has matching dimensions of 7.2-by-1.4-by-3.2 inches.

What is an HDMI Splitter and Use?

A High Definition Multimedia Interface (HDMI) signal is sent through an HDMI Cable. It is designed to be used with extra high resolution video feeds coming from DVD, Bluray, etc., which are then routed to a compatible viewing screen such as a television or computer monitor. HDMI cables are capable of different speeds based on the materials used to create them.
HDMI uncompressed digital signals can be carried through a cable with resolutions of up to 1080 pixels in vertical size (which is commonly set to 1920 pixels horizontally), although there are many configurations that can be carried with the HDMI cable. If necessary, the HDMI signal can downscale to 720 pixels when connected to a television that can only handle the lower mode.
Users may need to split this signal in order to distribute it among several screens. Such setups are possible via HDMI splitters, which are commonly used in bars, electronics stores, etc.
The HDMI splitter is a specialized accessory that is used to split an HDMI signal into many, which can then be connected to multiple display devices. An HDMI cable usually has an end that goes into the device output and another end that has two or more HDMI outputs that have been split from the single line. Alternatively, hardware splitters are connected to the output device via an HDMI cable and are used with an external power source to split the signal among multiple display devices. These cables can be configured to easily split a line among four or more displays at once.
The HDMI splitter only splits the original signal, which is shown on all of the connected devices. The image that appears on all screens will be identical and cannot be independently controlled when connected to an HDMI compatible device such as HD receivers/antennas.
The HDMI splitter is not to be confused with an routing Switch HDMI. A routing switcher places multiple HDMI compatible output sources into a signal that can be changed manually or via remote control and can dictate what output reaches the display(s).  

What Are Hdmi Cables And Dvi Cables?

HDMI cables or High definition multimedia interface was developed in the middle of 2003 is a new developed interface for full digital transmission of digital audio and video data from the personal computer to the monitor.
HDMI was introduced purposefully by the industry for home entertainment systems, which are used in private. More and more digital components are used for entertainment systems ( like DVD) and HDMI is developed to avoid the degradation during transforming analogous to digital or digital to analogous output. The film industry wanted to avoid the distribution of video data digitally, because of piracy reasons. Therefore High-bandwidth Digital Content Protection will be integrated in nearly every HDMI compatible system. The cable quality from the HDMI compatible system to the display is of most importance to achieve a fault free data transfer. HDMI 1.2 and DVI Cable achieve a data transfer rate of 5 Gbits/second.
DVI cables or digital visual interface is an interface for video data transmission and has become a common standard for the connection of high-quality TFT displays to the graphics card, in the computer area. There are some televisions in the home entertainment system world, which process over a DVI entrance and can receive digital video data from DVD players and personal computers. Because of the full digital transmission, DVI has much more advantages in opposite of VGA and SCART cables (analogue transmission).
There are several types of DVI :
DVI-I (integrated, that means it can transfer analogue and digital data)
DVI-D (digital, only digital data transfer)
DVI-A (analogue, only analogue data transfer)
The quality of the video output is dependent of the quality of all components of the system (DVD-player/PC, cable length/quality, television/monitor).
DVI can transmit video data with a resolution of up to 2560 x 1600.
More information and products please check: HDMI Extender Cable

How to Buy HDMI Switcher Online Shopping

HDMI stands for high-definition multimedia interface. It transmits high-definition signals, including video, 3D-encoded video, and multi-channel audio. HDMI is the preferred option for home entertainment systems: HDMI Switcher work with Blu-ray players, games consoles, DVD players, and media streamers. High-definition content can be displayed on a computer or TV screen, but when the display device has only one HDMI input it is not possible to connect more than one device at a time. In this case, a games console and a DVD player could not both be connected at the same time. So, using an HDMI switch means that multiple source devices can be connected to a computer or TV, which is a convenient option because the devices do not have to be unplugged when not in use. Moreover, it is not necessary to buy a new TV just because it does not have enough HDMI ports in order to meet the buyer’s needs.
Before buying HDMI switch, consider its features, its compatibility with other devices, as well as how to install and operate it.
Features of HDMI Switches
HDMI switches have a number of features that should be taken into account before buying. The number of ports, the HDMI cable, and the power source play an important role.
Ports on an HDMI Switch
The number of input ports on the HDMI switch varies. More than one port is required so that multiple devices, such as a games console and DVD player, do not have to be unplugged in order to connect a new one. Therefore, buyers should consider purchasing an HDMI switch with as many input ports as are available, so they they can be used as new devices are bought. It is also wise to consider the number of output ports. Basic HDMI switches have only one output, but the buyer may want the ability to transmit a signal to several TVs or projector screens. There are HDMI distribution amps that allow the buyer to connect one device with up to eight screens that then show the same picture. The most complicated input and output system is the HDMI matrix that connects multiple inputs and outputs and offers great flexibility.
Cable for an HDMI Switch
An HDMI cable transmits both video and audio, but occasionally additional audio capabilities are needed to allows for the integration of a source with a surround sound system. Some HDMI switches have optical-audio ports.
Powered Signal Amplification for an HDMI Switch
If the cable for the HDMI switch is very long, that is over 10 metres, then the powered signal amplification helps to strengthen it. This ensures high quality transmissions with a high speed at all times.
Power Source for an HDMI Switch
HDMI switches can be either powered or self-powered. Powered switches are plugged in with an AC adapter, while self-powered devices mean fewer wires around the house. Some self-powered models still have a power supply included in order to ensure that they are still compatible with older HDMI devices.
Audio Return Channel for an HDMI Switch
Some HDMI switches come with extra features that add to the functionality. For example, our offers HDMI switches with an Audio Return Channel (ARC) that increases flexibility by sending audio data to a surround sound controller or an AV receiver. With the ARC, there is no need for a separate audio connection. This is beneficial when the HDMI switch is used with a TV that has a tuner or integrated DVD player, as it allows the audio to be sent from the TV to the surround sound system.
Other new products in www.wholesalehdmicable.es, please click: Dual Link DVI Cable